H3C S3600 Series User Manual

Operation Manual – Routing Protocol
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 6
Route Capacity Configuration
6-2
When the free memory of the switch is equal to or lower than the lower limit, OSPF
connection will be disconnected and OSPF routes will be removed from the routing
table.
If automatic protocol connection recovery is enabled, when the free memory of the
switch restores to a value larger than the safety value, the switch automatically
re-establishes the OSPF connection. If the automatic protocol connection recovery
function is disabled, the switch will not reestablish the disconnected OSPF connection
even when the free memory restores to a value larger than the safety value.
6.2 Route Capacity Configuration
Route capacity configuration includes:
z Configuring the lower limit and the safety value of switch memory,
z Enabling/disabling the switch to recover the disconnected routing protocol
automatically.
6.2.1 Configuring the Lower Limit and the Safety Value of the Switch
Memory
Table 6-1 Set the lower limit and the safety value of switch memory
Operation Command Description
Enter system view
system-view
—
Set the lower limit and the
safety value of switch
memory
memory { safety
safety-value | limit
limit-value }*
Optional
By default, the default
values are used.
 Note:
The safety-value must be greater than the limit-value.
6.2.2 Enabling/Disabling Automatic Protocol Recovery
Table 6-2 Enable automatic protocol recovery
Operation Command Description
Enter system view
system-view
—
Enable automatic protocol
recovery
memory
auto-establish
enable
Optional
By default, automatic
protocol recovery is enabled.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English