H3C S3600 Series User Manual

Operation Manual – AAA-RADIUS-HWTACACS-EAD
H3C S3600 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration
1-32
immediately restores the communication with the primary server instead of
communicating with the secondary server, and at the same time restores the status of
the primary server to active while keeping the status of the secondary server
unchanged.
To control the interval at which users are charged in real time, you can set the real-time
accounting interval. After the setting, the switch periodically sends online users'
accounting information to RADIUS server at the set interval.
Table 1-21 Set the timers of RADIUS servers
Operation Command Description
Enter system view
system-view
—
Create a RADIUS
scheme and enter its view
radius scheme
radius-scheme-
name
Required
By default, a RADIUS scheme
named "system" has already been
created in the system.
Set the response timeout
time of RADIUS servers
timer
response-time
out seconds
Optional
By default, the response timeout
time of RADIUS servers is three
seconds.
Set the time that the
switch waits before it try to
re-communicate with
primary server and
restore the status of the
primary server to active
timer quiet
minutes
Optional
By default, the switch waits five
minutes before it restores the status
of the primary server to active.
Set the real-time
accounting interval
timer
realtime-accou
nting minutes
Optional
By default, the real-time accounting
interval is 12 minutes.
1.4.11 Enabling the Sending of Trap Message When a RADIUS Server is
Down
Table 1-22 Enable the sending of trap message when a RADIUS server is down
Operation Command Description
Enter system view
system-view
—
Enable the sending of
trap message when a
RADIUS server is down
radius trap
{ authentication-server-do
wn |
accounting-server-down }
Optional
By default, the switch
does not send trap
message when a
RADIUS server is down.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English