H3C S3600 Series User Manual

Operation Manual – CLI
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
CLI Configuration
1-11
Table 1-6 Access history commands
Operation Operation Description
Display history
commands
Execute the display
history-command
command
This command displays
valid history commands.
Recall the previous
history command
Press the up-arrow key or
<Ctrl+P>
This operation recalls the
previous history
command (if available).
Recall the next history
command
Pressing the down-arrow
key or <Ctrl+N>
This operation recalls the
next history command (if
available).
 Note:
z The Up and Down arrow keys can be used to recall history commands only in
terminals running on Windows 3.x or Telnet running on Windows 3.x. You can press
<Ctrl + P> or <Ctrl + N> in terminals running on Windows 9x to achieve the same
purpose.
z If you enter and execute the same command for multiple times, the command is
buffered when it is entered for the first time.
1.3.4 Error Messages
If the command you enter passes the syntax check, it will be successfully executed;
otherwise an error message will appear.
Table 1-7 lists the common error messages.
Table 1-7 Common error messages
Error message Description
The command does not exist.
The keyword does not exist.
The parameter type is wrong.
Unrecognized command
The parameter value is out of range.
Incomplete command The command entered is incomplete.
Too many parameters You have entered too many parameters.
Ambiguous command The parameters entered are ambiguous.
Wrong parameter found at '^' position.
The parameter at the '^' position is
incorrect.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English