H3C S3600 Series User Manual

Operation Manual – DHCP
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 2
DHCP Server Configuration
2-20
2.3.7 Customizing DHCP Service
With the evolution of DHCP, new options are constantly coming into being. You can add
the new options as the properties of DHCP servers by performing the following
configuration.
Table 2-18 Customize DHCP service
Operation Command Description
Enter system view
system-view
—
interface interface-type
interface-number
dhcp server option code { ascii
ascii-string | hex
hex-string&<1-10> | ip-address
ip-address&<1-8> }
Configure the
current
interface
quit
Configure
customized
options
Configure
multiple
interfaces in
system view
dhcp server option code { ascii
ascii-string | hex
hex-string&<1-10> | ip-address
ip-address&<1-8> } { interface
interface-type interface-number [ to
interface-type interface-number ] |
all }
Required
By default,
no
customized
option is
configured.
2.3.8 Configuring Connection Between the DHCP Interface Address Pool
and the BIMS Server
After configuring the connection between the DHCP interface address pool and the
BIMS server, you can enable the BIMS server to manage the devices that have
obtained IP addresses from the interface address pool.
Table 2-19 Configure connection between the DHCP interface address pool and the
BIMS server
Operation Command Description
Enter system view
system-view
—
Configure connection
between the DHCP
interface address pool
and the BIMS server
dhcp server bims-server
ip ip-address [ port
port-number ] sharekey key
{ interface interface-type
interface-number [ to
interface-type
interface-number ] | all }
Required
By default, no
connection between the
DHCP interface
address pool and the
BIMS server is
configured.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English