H3C S3600 Series User Manual

Operation Manual – DHCP
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 2
DHCP Server Configuration
2-26
I. Configuring the option 184 supporting function in system view
Table 2-24 Configure the option 184 supporting function in system view
Operation Command Description
Enter system view
system-view
—
Configure the interface
to operate in DHCP
server mode and
assign the IP
addresses of a
specified
interface-based
address pool to DHCP
clients
dhcp select interface { all | interface
interface-type interface-number [ to
interface-type interface-number ] }
Required
Configure the NCP-IP
sub-option
dhcp server voice-config ncp-ip
ip-address { all | interface interface-type
interface-number [ to interface-type
interface-number ] }
Required
Configure the AS-IP
sub-option
dhcp server voice-config as-ip
ip-address { all | interface interface-type
interface-number [ to interface-type
interface-number ] }
Configure the voice
VLAN configuration
sub-option
dhcp server voice-config voice-vlan
vlan-id { enable | disable } { all |
interface interface-type interface-number
[ to interface-type interface-number ] }
Configure the Fail-over
call routing sub-option
dhcp server voice-config fail-over
ip-address dialer-string { all | interface
interface-type interface-number [ to
interface-type interface-number ] }
Optional
 Note:
z Perform the operations listed in Table 2-24 in system view if you specify to assign IP
addresses of an interface-based address pool to DHCP clients.
z This method allows you to configure the option 184 supporting function for multiple
interfaces.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English