H3C S3600 Series User Manual

Operation Manual – DNS
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
DNS Configuration
1-3
1.2 Configuring Static Domain Name Resolution
Table 1-1 Configure static domain name resolution:
Operation Command Description
Enter system view
system-view
—
Configure a mapping
between a host name
and an IP address
ip host hostname
ip-address
Required
No IP address is assigned to a
host name by default.
 Note:
The IP address you assign to a host name last time will overwrite the previous one if
there is any.
You may create up to 50 static mappings between domain names and IP addresses.
1.3 Configuring Dynamic Domain Name Resolution
1.3.1 Configuration Procedure
Table 1-2 Configure dynamic domain name resolution:
Operation Command Description
Enter the system view
system-view
—
Enable dynamic domain
name resolution
dns resolve
Required
Disabled by default
Configure an IP address
for the DNS Server
dns server ip-address
Required
No IP address is configured
for the DNS server by
default.
Configure DNS suffixes
dns domain
domain-name
Optional
No DNS suffix is configured
by default
 Note:
You may configure up to six DNS Servers and ten DNS suffixes.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English