H3C S3600 Series User Manual

Operation Manual – SNMP-RMON
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 2
RMON Configuration
2-5
2.3 Displaying RMON
After the above configuration, you can execute the display command in any view to
display the RMON running status, and to verify the configuration.
Table 2-2 Display RMON
Operation Command Description
Display RMON statistics
display rmon statistics
[ interface-type interface-number |
unit unit-number ]
Display RMON history
information
display rmon history
[ interface-type interface-number |
unit unit-number ]
Display RMON alarm
information
display rmon alarm
[ entry-number ]
Display extended RMON
alarm information
display rmon prialarm
[ prialarm-entry-number ]
Display RMON events
display rmon event
[ event-entry ]
Display RMON event logs
display rmon eventlog
[ event-entry ]
These commands
can be executed
in any view.
2.4 RMON Configuration Example
I. Network requirements
z Ensure that the SNMP agents are correctly configured before performing RMON
configuration.
z The switch to be tested has a configuration terminal connected to its console port
and is connected to a remote NMS through Internet. Create an entry in the
Ethernet statistics table to generate statistics on the Ethernet port performance for
network management.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English