H3C S3600 Series User Manual

Operation Manual – QoS-QoS Profile
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
QoS Configuration
1-17
Operation Command Description
Set the
precedence of the
protocol packet
protocol-priority
protocol-type
protocol-type
{ ip-precedence
ip-precedence | dscp
dscp-value }
Required
You can modify the IP precedence
or DSCP precedence of the
protocol packet
Only the precedence of TELNET,
OSPF, SNMP, and ICMP protocol
packets is supported currently
Display the
precedence of the
protocol packet
display
protocol-priority
Optional
You can execute the display
command in any view
 Note:
The precedence of OSPF protocol packets cannot be changed on S3600-SI series
switches.
1.6.3 Configuration Example
z Set the IP precedence of ICMP protocol packets to 3.
z Display the configuration results.
Configuration procedure:
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] protocol-priority protocol-type icmp ip-precedence 3
[H3C] display protocol-priority
Protocol: icmp
IP-Precedence: flash(3)
1.7 Configuring Port Rate Limit
1.7.1 Configuration Prerequisites
z The ports on which rate limit is to be performed is specified
z The target rate is specified
z The direction of rate limit is specified

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English