H3C S3600 Series User Manual

Operation Manual – DHCP
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 2
DHCP Server Configuration
2-12
You can configure gateway addresses for address pools on a DHCP server. Currently,
you can configure up to eight gateway addresses for a DHCP address pool.
Table 2-9 Configure gateway addresses for DHCP clients
Operation Command Description
Enter system view
system-view
—
Create a DHCP
address pool and
enter DHCP
address pool view
dhcp server ip-pool
pool-name
Required
By default, no global DHCP
address pool is created.
Configure gateway
addresses for
DHCP clients
gateway-list
ip-address&<1-8>
Required
By default, no gateway
address is configured.
2.2.9 Configuring Connection Between a DHCP Global Address Pool and a
BIMS Server
Branch intelligent management system (BIMS) is a kind of network management
software, provided by H3C Technologies Co., Ltd. With BIMS you can manage and
monitor network devices that dynamically obtain IP addresses universally and
effectively.
After configuring the connection between the DHCP global address pool and the BIMS
server, you can enable the BIMS server to manage the devices that have obtained IP
addresses from the global address pool.
Table 2-10 Configure connection between a DHCP global address pool and a BIMS
server
Operation Command Description
Enter system view
system-view
—
Create a DHCP address
pool and enter DHCP
address pool view
dhcp server ip-pool
pool-name
Required
By default, no DHCP
global address pool is
created.
Configure the connection
between the DHCP global
address pool and the
BIMS server
bims-server ip ip-address
[ port port-number ]
sharekey key
Required
By default, no
connection between
the DHCP global
address pool and the
BIMS server is
configured.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English