H3C S3600 Series

Operation Manual – MSTP
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
MSTP Configuration
1-42
Port 1
H3C Switch
Other manufacturers Switch
Port 2
Port 1
H3C Switch
Other manufacturers Switch
Port 2
Figure 1-5 Network diagram for rapid transition configuration
II. Configuration procedure
1) Configure the rapid transition feature in system view
Table 1-37 Configure the rapid transition feature in system view
Operation Command Description
Enter system view
system-view
—
Enable the rapid transition
feature
stp interface
interface-type
interface-number
no-agreement-check
Required
By default, the rapid
transition feature is
disabled on a port.
2) Configure the rapid transition feature in Ethernet port view
Table 1-38 Configure the rapid transition feature in Ethernet port view
Operation Command Description
Enter system view
system-view
—
Enter Ethernet port view
interface interface-type
interface-number
—
Enable the rapid transition
feature
stp
no-agreement-check
Required
By default, the rapid
transition feature is
disabled on a port.