H3C S3600 Series User Manual

Operation Manual – Login
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1 Logging into an Ethernet Switch
1-2
2) A relative user interface index can be obtained by appending a number to the
identifier of a user interface type. It is generated by user interface type. The
relative user interface indexes are as follows:
z AUX user interface: AUX 0
z VTY user interfaces: VTY 0, VTY 1, VTY 2, and so on.
1.2.3 Common User Interface Configuration
Table 1-2 Common user interface configuration
Operation Command Description
Lock the current user
interface
lock
Optional
Execute this command in
user view.
A user interface is not locked
by default.
Specify to send
messages to all user
interfaces/a specified
user interface
send { all | number |
type number }
Optional
Execute this command in
user view.
Disconnect a specified
user interface
free user-interface
[ type ] number
Optional
Execute this command in
user view.
Enter system view
system-view
—
Set the banner
header [ incoming |
login | shell ] text
Optional
Set a system name for
the switch
sysname string
Optional
The system name defaults to
“H3C”.
Enter user interface
view
user-interface [ type ]
first-number
[ last-number ]
—
Set the command that is
automatically executed
when a user logs into
the user interface
auto-execute
command text
Optional
By default, no command is
automatically executed when
a user logs into a user
interface.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English