H3C S3600 Series User Manual

Operation Manual – Information Center
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
Information Cente
r
1-10
Operation Command Description
Enable log
information
terminal display
function
terminal logging
Optional
By default, log information terminal
display is enabled.
Enable trap
information
terminal display
function
terminal trapping
Optional
By default, trap information terminal
display is enabled.
1.2.5 Enabling Information Output to the Log Buffer
Table 1-10 lists the related configurations on the switch.
Table 1-10 Enable information output to the log buffer
Operation Command Description
Enter system view
system-view
—
Enable the
information center
info-center enable
Optional
By default, the information
center is enabled.
Enable information
output to the log
buffer
info-center logbuffer
[ channel { channel-number
| channel-name } | size
buffersize ]*
Optional
By default, the switch uses
information channel 4 to
output log information to the
log buffer, which can holds up
to 512 items by default.
Define an
information source
info-center source
{ modu-name | default }
channel { channel-number |
channel-name } [ { log | trap
| debug } { level severity |
state state } ]*
Required
Set the format of
time stamp
info-center timestamp { log
| trap | debugging } { boot |
date | none }
Optional
This is to set the time stamp
format for log/debugging/trap
information output.
This determines how the time
stamp is presented to users.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English