EasyManuals Logo

H3C S3600 Series User Manual

H3C S3600 Series
966 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #889 background imageLoading...
Page #889 background image
Operation Manual – Information Center
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
Information Cente
r
1-9
Operation Command Description
Define an
information source
info-center source
{ modu-name | default }
channel { channel-number |
channel-name } [ { log | trap
| debug } { level severity |
state state } ]*
Required
Set the format of
time stamp
info-center timestamp { log
| trap | debugging } { boot |
date | none }
Optional
This is to set the time stamp
format for log/debugging/trap
information output.
This determines how the time
stamp is presented to users.
Note:
z When there are multiple Telnet users or dumb terminal users, they share some
configuration parameters including module filter, language and severity level
threshold. In this case, change to any such parameter made by one user will also be
reflected on all other user terminals.
z To view debugging information of specific modules, you need to set the information
type as debug when defining the information source, and enable debugging for
corresponding modules through the debugging command.
To view the log/debugging/trap output information on the monitor terminal, you should
enable the corresponding log/debugging/trap display function on the switch.
For example, to view log information of the switch on a monitor terminal, you need to
not only enable log information output to the monitor terminal, but also enable log
information terminal display function with the terminal logging command.
Perform the following configuration in user view.
Table 1-9 Enable debugging/log/trap terminal display
Operation Command Description
Enable the
debugging/log/trap
information
terminal display
function
terminal monitor
Optional
By default, this function is enabled
for console users.
Enable debugging
information
terminal display
function
terminal debugging
Optional
By default, debugging information
terminal display is disabled.

Table of Contents

Other manuals for H3C S3600 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S3600 Series and is the answer not in the manual?

H3C S3600 Series Specifications

General IconGeneral
BrandH3C
ModelS3600 Series
CategorySwitch
LanguageEnglish

Related product manuals