H3C S3600 Series

Operation Manual – FTP and TFTP
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
FTP and TFTP Configuration
1-16
III. Specifying the source interface and source IP address for a TFTP client
You can specify the source interface and source IP address for a switch operating as a
TFTP client, so that it can connect with a remote TFTP server through the IP address of
the specified interface or the specified IP address.
Table 1-11 Specify the source interface and source IP address for a TFTP client
Operation Command Description
Specify the source interface
only used for the current
connection
tftp tftp-server
source-interface
interface-type
interface-number { get
source-file [ dest-file ] | put
source-file-url [ dest-file ] }
Optional
Specify the source IP
address only used for the
current connection
tftp tftp-server source-ip
ip-address { get source-file
[ dest-file ] | put source-file-url
[ dest-file ] }
Optional
Enter system view
system-view
—
Specify an interface as the
fixed source interface to be
used in each connection
tftp source-interface
interface-type
interface-number
Optional
Specify an IP address as the
fixed source IP address to be
used in each connection
tftp source-ip ip-address
Optional
Display the fixed source IP
address used by a TFTP
client to connect to a TFTP
server
display tftp source-ip
This command
can be executed
in any view.