H3C S3600 Series User Manual

Operation Manual – FTP and TFTP
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
FTP and TFTP Configuration
1-10
Operation Command Description
Terminate the current FTP
connection without exiting
FTP client view
disconnect
Optional
Terminate the current FTP
connection without exiting
FTP client view
close
Optional
Terminate the current FTP
connection and quit to
user view
quit
Optional
Terminate the current FTP
connection and quit to
user view
bye
Optional
Display the on-line help
on a specified command
concerning FTP
remotehelp
[ protocol-command ]
Optional
Enable verbose function
verbose
Optional
The verbose function is
enabled by default.
II. Specifying the source interface and source IP address for an FTP client
You can specify the source interface and source IP address for a switch acting as an
FTP client, so that it can connect to a remote FTP server.
Table 1-8 Specify the source interface and source IP address for an FTP client
Operation Command Description
Specify the source
interface only used for the
current connection
ftp { cluster | remote-server }
source-interface
interface-type
interface-number
Optional
Specify the source IP
address only used for the
current connection
ftp { cluster | remote-server }
source-ip ip-address
Optional
Enter system view
system-view
—
Specify an interface as
the fixed source interface
to be used in each
connection
ftp source-interface
interface-type
interface-number
Optional
Specify an IP address as
the fixed source IP
address to be used in
each connection
ftp source-ip ip-address
Optional

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English