EasyManuals Logo

H3C S3600 Series User Manual

H3C S3600 Series
966 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #268 background imageLoading...
Page #268 background image
Operation Manual – MSTP
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
MSTP Configuration
1-39
II. Configuration procedure
Table 1-36 Configure digest snooping
Operation Command Description
Enter system view
system-view
Enter Ethernet port view
interface interface-type
interface-number
Enable the digest
snooping feature
stp
config-digest-snooping
Required
The digest snooping
feature is disabled on the
port by default.
Return to system view
quit
Enable the digest
snooping feature globally
stp
config-digest-snooping
Required
The digest snooping
feature is disabled
globally by default.
Display the configuration
display
current-configuration
You can execute this
command in any view.
Note:
z When the digest snooping feature is enabled on a port, the port state turns to the
discarding state. That is, the port will not send BPDU packets. The port is not
involved in the STP calculation until it receives BPDU packets from the peer port.
z The digest snooping feature is needed only when your switch is connected to
another manufacturer’s switches adopting proprietary spanning tree protocols.
z To enable the digest snooping feature successfully, you must first enable it on all the
ports of your switch that are connected to another manufacturer’s switches adopting
proprietary spanning tree protocols and then enable it globally.
z To enable the digest snooping feature, the interconnected switches and another
manufacturer’s switch adopting proprietary spanning tree protocols must be
configured with exactly the same MST region-related configurations (including
region name, revision level, and VLAN-to-MSTI mapping).
z The digest snooping feature must be enabled on all the ports of your S3600
Ethernet switches connected to another manufacturer's switches adopting
proprietary spanning tree protocols in the same MST region.
z When the digest snooping feature is enabled globally, the VLAN-to-MSTI mapping
table cannot be modified.
z The digest snooping feature is not applicable to edge ports in an MST region.

Table of Contents

Other manuals for H3C S3600 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S3600 Series and is the answer not in the manual?

H3C S3600 Series Specifications

General IconGeneral
BrandH3C
ModelS3600 Series
CategorySwitch
LanguageEnglish

Related product manuals