H3C S3600 Series User Manual

Operation Manual – AAA-RADIUS-HWTACACS-EAD
H3C S3600 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration
1-27
Operation Command Description
Set a shared key for
RADIUS accounting
messages
key accounting string
Required
Caution:
The authentication/authorization shared key and the accounting shared key you set on
the switch must be respectively consistent with the shared key on the
authentication/authorization server and the shared key on the accounting server.
1.4.5 Configuring Maximum Number of Transmission Attempts of RADIUS
Request
The communication in RADIUS is unreliable because this protocol uses UDP packets
to carry its data. Therefore, it is necessary for the switch to retransmit a RADIUS
request if it gets no response from the RADIUS server after the response timeout timer
expires. If the switch gets no answer after it has tried the maximum number of times to
transmit the request, the switch considers that the request fails.
Table 1-16 Configure the maximum transmission attempts of a RADIUS request
Operation Command Description
Enter system view
system-view
—
Create a RADIUS
scheme and enter its view
radius scheme
radius-scheme-
name
Required
By default, a RADIUS scheme
named "system" has already been
created in the system.
Set the maximum number
of transmission attempts
of a RADIUS request
retry retry-times
Optional
By default, the system can try three
times to transmit a RADIUS
request.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English