H3C S3600 Series User Manual

Operation Manual – FTP and TFTP
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
FTP and TFTP Configuration
1-9
Table 1-7 Basic configurations on an FTP client
Operation Command Description
Enter FTP Client view
ftp [ cluster |
remote-server
[ port-number ] ]
—
Specify to transfer files in
ASCII characters
ascii
Optional
By default, files are
transferred in ASCII
characters.
Specify to transfer files in
binary streams
binary
Optional
Set the data transfer
mode to passive
passive
Optional
By default, the passive
mode is adopted.
Change the work
directory on the remote
FTP server
cd pathname
Optional
Change the work
directory to be the parent
directory
cdup
Optional
Get the local work path on
the FTP client
lcd
Optional
Display the work directory
on the FTP server
pwd
Optional
Create a directory on the
remote FTP server
mkdir pathname
Optional
Remove a directory on
the remote FTP server
rmdir pathname
Optional
Delete a specified file
delete remotefile
Optional
Query the specified files dir [ filename ] [ localfile ] Optional
Query a specified remote
file
ls [ remotefile ] [ localfile ] Optional
Download a remote file get remotefile [ localfile ] Optional
Upload a local file to the
remote FTP server
put localfile [ remotefile ] Optional
Rename a file on a
remote host.
rename remote-source
remote-dest
Optional
Switch to another FTP
user
user username
[ password ]
Optional
Connect to a remote FTP
server
open { ip-address |
server-name } [ port ]
Optional

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English