H3C S3600 Series User Manual

Operation Manual – System Maintenance and Debugging
H3C S3600 Series Ethernet Switches-Release 1510
Chapter 2 Basic System Configuration
& Debugging
2-5
1
2
3
ON
Protocol debugging setting
ON OFF
ONOFF
1
3
1
Debugging information
1
2
3
Terminal display setting
1
3
ONON OFF
ONOFF
1
3
1
Debugging information
1
2
3
3
3
ON
Protocol debugging setting
ON OFF
ONOFF
1
3
1
Debugging information
1
2
3
1
3
Terminal display setting
1
3
ONON OFF
ONOFF
1
3
1
3
1
33
t
Debugging information
Figure 2-1 Debugging information outpu
You can use the following commands to perform the settings.
Table 2-11 Enable debugging and terminal display
Operation Command Description
Enable system debugging
for specific module
debugging
module-name
[ debugging-option ]
By default, all debugging is
disabled in the system.
Because the output of
debugging information will
affect the efficiency of the
system, disable your
debugging after you finish it.
Enable terminal display
for debugging
terminal debugging
By default, terminal display
for debugging is disabled.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English