Operation Manual – Multicast
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 3 Common Multicast Configuration
3-5
Operation Command Description
Display the
information about
the multicast
routing table
display multicast
routing-table
[ group-address [ mask
{ group-mask |
mask-length } ] |
source-address [ mask
{ group-mask |
mask-length } ] |
incoming-interface
{ interface-type
interface-number |
register } ]*
Display the
information about
the multicast
forwarding table
display multicast
forwarding-table
[ group-address [ mask
{ group-mask |
mask-length } ] |
source-address [ mask
{ group-mask |
mask-length } ] |
incoming-interface
{ interface-type
interface-number ]
register } ]*
Display the
information about
a multicast
forward table
containing port
information
display mpm
forwarding-table
[ group-address ]
Display the
information about
the IP multicast
groups and MAC
multicast groups
contained in a
VLAN (or all the
VLANs)
configured on a
switch
display mpm group
[ vlan vlan-id ]
These commands can be
executed in any view.
Three kinds of tables affect data transmission. Their correlations are as follows:
z Each multicast routing protocol has its own multicast routing table.
z The multicast routing information of all multicast routing protocols is integrated to
form the core multicast routing table.
z The core multicast routing table is consistent with the multicast forwarding table,
which is actually in charge of multicast packet forwarding.