To Next Page

To Previous Page

Operation Manual – Information Center

H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1

Information Cente

1-3

Module name Description

MSTP Multiple spanning tree protocol module

MTRACE Multicast traceroute query module

NAT Network address translation module

NDP Neighbor discovery protocol module

NTDP Network topology discovery protocol module

NTP Network time protocol module

OSPF Open shortest path first module

PKI Public key infrastructure module

RDS Radius module

RMON Remote monitor module

RSA Revest, Shamir and Adleman encryption module

SHELL User interface module

SNMP Simple network management protocol module

SOCKET Socket module

SSH Secure shell module

SYSMIB System MIB module

TAC HWTACACS module

TELNET Telnet module

TFTPC TFTP client module

VLAN Virtual local area network module

VRRP VRRP (virtual router redundancy protocol) module

VTY VTY (virtual type terminal) module

XM Xmodem module

default Default settings for all the modules

Note that a slash (/) separates the module name and severity level.

5) Severity

Switch information falls into three categories: log information, debugging information

and trap information. The information center classifies the information into eight levels

by severity or emergency. The higher the information severity is, the lower the

corresponding level is. For example, the “debugging” severity corresponds to level 8,

and the “emergencies“ severity corresponds to level 1. If filtered by severity, the

information of a severity level greater than the defined threshold will be filtered out for

H3C S3600 Series User Manual

Other manuals for H3C S3600 Series