Operation Manual – Information Center
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
Information Cente
1-2
It refers to the system name of the host, which is “H3C” by default.
You can modify the host name with the sysname command. Refer to System
Maintaining and Debugging part of the manual for detailed operations.
Note that a space separates the host name and module name.
4) Module name
It indicates the modules that generate the information. The module name is in
abbreviation form to indicate different modules.
Table 1-1 lists some modules.
Table 1-1 Examples of modules generating the information
Module name Description
8021X 802.1x module
ACL Access control list module
ADBM Address base module
AM Access management module
ARP Address resolution protocol module
CMD Command line module
DEV Device management module
DHCP Dynamic host configuration protocol module
DNS Domain name system module
ETH Ethernet module
FIB Forwarding module
FTM Fabric topology management module
FTMCMD Fabric topology management command module
FTPS FTP server module
HA High availability module
HABP Huawei authentication bypass protocol module
HTTPD HTTP server module
HWCM Huawei Configuration Management private MIB module
HWP HWPing module
IFNET Interface management module
IGSP IGMP snooping module
IP Internet protocol module
LAGG Link aggregation module
LINE Terminal line module
To Next Page
Loading...
Need help?
General