H3C S3600 Series User Manual

Operation Manual – CLI
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
CLI Configuration
1-8
View
Available
operation
Prompt Enter method Quit method
RADIUS
scheme
view
Configure
RADIUS
parameters
[H3C-radius
-1]
Execute the
radius
scheme 1
command in
system view.
Execute the quit
command to return
to system view.
Execute the return
command to return
to user view.
ISP
domain
view
Configure
ISP domain
parameters
[H3C-isp-aa
a163.net]
Execute the
domain
aaa163.net
command in
system view.
Execute the quit
command to return
to system view.
Execute the return
command to return
to user view.
HWPing
view
Configure
HWPing
parameters
[H3C-hwpin
g-a123-a12
3]
Execute the
hwping a123
a123 command
in system view
Execute the quit
command to return
to system view.
Execute the return
command to return
to user view.
HWTACA
CS view
Configure
HWTACACS
parameters
[H3C-hwtac
acs-a123]
Execute the
hwtacacs
scheme a123
command in
system view
Execute the quit
command to return
to system view.
Execute the return
command to return
to user view.
MSDP
view
Configure
MSDP
parameters
[H3C-msdp]
Execute the
msdp
command in
system view
Execute the quit
command to return
to system view.
Execute the return
command to return
to user view.
PoE
profile
view
Configure
PoE profile
parameters
[H3C-poe-p
rofile-a123]
Execute the
poe-profile
a123 command
in system view
Execute the quit
command to return
to system view.
Execute the return
command to return
to user view.
 Note:
The <Ctrl + Z> keys function as the return command does.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English