H3C S3600 Series - Page 75

Operation Manual – Login
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 4
Logging in Using Modem
4-5
Figure 4-3 Call the modem
5) Provide the password when prompted. If the password is correct, the prompt (such
as <H3C>) appears. You can then configure or manage the switch. You can also
enter the character ? at anytime for help. Refer to the following chapters for
information about the configuration commands.
 Note:
If you perform no AUX user-related configuration on the switch, the commands of level
3 are available to modem users. Refer to the CLI module for information about
command level.