H3C S3600 Series

Operation Manual – Multicast
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 6 IGMP Configuration
6-10
Operation Command Description
Limit the range of
multicast groups that the
interface serves
igmp group-policy
acl-number [ 1 | 2 | port
interface-type
interface-number [ to
interface-type
interface-number ] ]
Optional
z By default, the filter is
not configured, that is,
any multicast group is
permitted on a port.
z If the port keyword is
specified, the specified
port must belong to the
VLAN of the VLAN
interface.
z You can configure to
filter the IP addresses
of some multicast
groups in ACL.
z 1 and 2 are the IGMP
version numbers.
IGMPv2 is used by
default.
Quit interface view.
quit
—
Enter Ethernet port view
interface interface-type
interface-number
—
Limit the range of
multicast groups that the
interface serves
igmp group-policy
acl-number vlan vlan-id
Optional
z By default, the filter is
not configured, that is,
any multicast group is
permitted on the port.
z The port must belong
to the IGMP-enabled
VLAN specified in the
command. Otherwise,
the command does not
take effect.