H3C S3600 Series User Manual

Operation Manual – Multicast
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 7 PIM Configuration
7-15
Operation Command Description
Configure static RPs
static-rp rp-address
[ acl-number ]
Optional
z You can configure to
filter the IP addresses
of some multicast
groups in ACL.
z By default, static RPs
are not set for the
switch.
Limit the range of valid
BSRs
bsr-policy acl-number
Optional
z You can configure to
filter the IP addresses
of some multicast
groups in ACL.
z By default, the range
of valid BSRs is not set
for the switch.
Limit the range of valid
C-RPs
crp-policy acl-number
Optional
z You can configure to
filter the IP addresses
of some multicast
groups in ACL.
z By default, the range
of valid C-RPs is not
set for the switch.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English