To Next Page

To Previous Page

Operation Manual – Login

H3C S3600 Series Ethernet Switches-Release 1510 Chapter 2 Logging in through the Console Port

2-16

# Set the service type to Terminal, Specify commands of level 2 are available to users

logging into the AUX user interface.

[H3C-luser-guest] service-type terminal level 2

[H3C-luser-guest] quit

# Enter AUX user interface view.

[H3C] user-interface aux 0

# Configure to authenticate users logging in through the Console port in the scheme

mode.

[H3C-ui-aux0] authentication-mode scheme

# Set the command level available to the users logging into the AUX user interface to 2.

[H3C-ui-aux0] user privilege level 2

# Set the baud rate of the Console port to 19,200 bps.

[H3C-ui-aux0] speed 19200

# Set the maximum number of lines the screen can contain to 30.

[H3C-ui-aux0] screen-length 30

# Set the maximum number of commands the history command buffer can store to 20.

[H3C-ui-aux0] history-command max-size 20

# Set the timeout time of the AUX user interface to 6 minutes.

[H3C-ui-aux0] idle-timeout 6

H3C S3600 Series User Manual

Other manuals for H3C S3600 Series