H3C S3600 Series

Operation Manual – IRF Fabric
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
IRF Fabric Configuration
1-12
# Configure the authentication mode as simple password and the password as
welcome.
[hello] irf-fabric authentication-mode simple welcome
2) Configure Switch B.
# Configure the unit ID as 2.
<H3C> system-view
[H3C] change unit-id 1 to 2
# Configure the unit name as unit 2.
[H3C] set unit 1 name unit2
# Configure the fabric name as hello.
[H3C] sysname hello
# Configure the authentication mode as simple password and the password as
welcome.
[hello] irf-fabric authentication-mode simple welcome
Configurations on Switch C and Switch D are similar with the above configurations.