H3C S3600 Series User Manual

Operation Manual – PoE-PoE Profile
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 2
PoE Profile Configuration
2-2
Operation Command Description
In system view
apply poe-profile
profile-name
interface
interface-type
interface-number [ to
interface-type
interface-number ]
Enter
Ethernet
port
view
interface
interface-type
interface-number
Apply the
existing
PoE
profile to
the
specified
Ethernet
port
In
Ethernet
port
view
Apply
the
existing
PoE
profile to
the port
apply poe-profile
profile-name
Required
Users can decide
whether to configure
the settings in system
view or port view
 Note:
A PoE profile is a group of PoE configurations. Multiple PoE features can be set in a
PoE profile. When the apply poe-profile command is used to apply a PoE profile to a
port, some PoE features can be applied successfully while some PoE configurations in
it cannot. PoE profiles are applied to S3600 series Ethernet switches according to the
following rules:
z When the apply poe-profile command is used to apply a PoE profile to a port, the
PoE profile is applied successfully only if one PoE feature in the PoE profile is
applied properly. When the display current-configuration command is used for
query, it is displayed that the PoE profile is applied properly to the port.
z If one or more features in the PoE profile are not applied properly on a port, the
switch will prompt explicitly which PoE features in the PoE profile are not applied
properly on which ports.
z The display current-configuration command can be used to query which PoE
profiles are applied to a port. However, the command cannot be used to query which
PoE features in a PoE profiles are applied successfully.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English