H3C S3600 Series User Manual

Operation Manual – Login
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 8
User Control
8-6
Operation Command Description
Apply the ACL
while configuring
the SNMP
community name
snmp-agent community
{ read | write }
community-name [ mib-view
view-name | acl
acl-number ]*
Optional
By default, SNMPv1 and
SNMPv2c use community
name to access.
Apply the ACL
while configuring
the SNMP group
name
snmp-agent group { v1 |
v2c } group-name
[ read-view read-view ]
[ write-view write-view ]
[ notify-view notify-view ]
[ acl acl-number ]
snmp-agent group v3
group-name
[ authentication | privacy ]
[ read-view read-view ]
[ write-view write-view ]
[ notify-view notify-view ]
[ acl acl-number ]
Optional
By default, the authentication
mode and the encryption
mode are configured as none
for the group.
Apply the ACL
while configuring
the SNMP user
name
snmp-agent usm-user { v1
| v2c } user-name
group-name [ acl
acl-number ]
snmp-agent usm-user v3
user-name group-name
[ authentication-mode
{ md5 | sha } auth-password
[ privacy-mode des56
priv-password ] [ acl
acl-number ]
Optional
 Note:
You can specify different ACLs while configuring the SNMP community name, SNMP
group name, and SNMP user name..
As SNMP community name is a feature of SNMPv1 and SNMPv2c, the specified ACLs
in the command that configures SNMP community names (the snmp-agent
community command) take effect in the network management systems that adopt
SNMPv1 or SNMPv2c.
Similarly, as SNMP group name and SNMP username name are a feature of SNMPv2c
and the higher SNMP versions, the specified ACLs in the commands that configure
SNMP group names and SNMP user names take effect in the network management
systems that adopt SNMPv2c or higher SNMP versions. If you specify ACLs in the
commands, the network management users are filtered by the SNMP group name and
SNMP user name.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English