Cisco 300 Series User Manual

Telnet, Secure Shell (SSH) and Secure Login (Slogin) Commands
1015 OL-32830-01 Command Line Interface Reference Guide
52
Parameters
• username username —Specifies the remote SSH client username. (Length:
1–48 characters)
• fingerprint {bubble-babble | hex}—Specifies the fingerprint display format.
The possible values are:
- bubble-babble—Specifies that the fingerprint is displayed in Bubble
Babble format.
- hex—Specifies that the fingerprint is displayed in hexadecimal format.
Default Configuration
The default fingerprint format is hexadecimal.
Command Mode
Privileged EXEC mode
Example
The following examples display SSH public keys stored on the device.
switchxxxxxx# show crypto key pubkey-chain ssh
Username Fingerprint
----------- ----------------------------------------------------------
bob
9A:CC:01:C5:78:39:27:86:79:CC:23:C5:98:59:F1:86
john 98:F7:6E:28:F2:79:87:C8:18:F8:88:CC:F8:89:87:C8
switchxxxxxx# show crypto key pubkey-chain ssh username bob
Username Fingerprint
----------- ----------------------------------------------------------
bob
9A:CC:01:C5:78:39:27:86:79:CC:23:C5:98:59:F1:86

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48