Cisco 300 Series

SYSLOG Commands
OL-32830-01 Command Line Interface Reference Guide 956
49
Default Configuration
None
Command Mode
Privileged EXEC mode
Example
The following example clears messages from the logging file.
switchxxxxxx# clear logging file
Clear Logging File [y/n]
49.4 file-system logging
To enable logging file system events, use the file-system logging Global
Configuration mode command. To disable logging file system events, use the no
form of this command.
Syntax
file-system logging
{copy | delete-rename}
no file-system logging {copy | delete-rename}
Parameters
• copy—Specifies logging messages related to file copy operations.
• delete-rename—Specifies logging messages related to file deletion and
renaming operations.
Default Configuration
Enabled.
Command Mode
Global Configuration mode