Cisco 300 Series User Manual

Port Channel Commands
OL-32830-01 Command Line Interface Reference Guide 738
37
37.3 show interfaces port-channel
To display port-channel information for all port channels or for a specific port
channel, use the show interfaces port-channel Privileged EXEC mode command.
Syntax
show interfaces port-channel
[interface-id]
Parameters
interface-id—(Optional) Specify an interface ID. The interface ID must be a port
channel.
Command Mode
Privileged EXEC mode
Examples
The following example displays information on all port-channels.
switchxxxxxx# show interfaces port-channel
Load balancing: src-dst-mac.
Gathering information...
Channel Ports
------- -----
Po1 Active: 1,Inactive: gi12-3
Po2 Active: 5 Inactive: gi14

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48