Cisco 300 Series User Manual

SYSLOG Commands
OL-32830-01 Command Line Interface Reference Guide 968
49
49.16 show logging file
To display the logging status and the SYSLOG messages stored in the logging file,
use the show logging file Privileged EXEC mode command.
Syntax
show logging file
Parameters
This command has no arguments or keywords.
Default Configuration
None
Command Mode
Privileged EXEC mode
Example
The following example displays the logging status and the SYSLOG messages
stored in the logging file.
switchxxxxxx# show logging file
Logging is enabled.
Origin id: hostname
Console Logging: Level info. Console Messages: 0 Dropped.
Buffer Logging: Level info. Buffer Messages: 61 Logged, 61 Displayed, 200 Max.
File Logging: Level error. File Messages: 898 Logged, 64 Dropped.
4 messages were not logged
Application filtering control
Application Event Status
-------------------- ---------------- ---------
AAA Login Enabled
File system Copy Enabled

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48