Cisco 300 Series User Manual

34
OL-32830-01 Command Line Interface Reference Guide 705
MLD Snooping Commands
34.0
34.1 ipv6 mld snooping (Global)
To enable IPv6 Multicast Listener Discovery (MLD) snooping, use the ipv6 mld
snooping command in Global Configuration mode. To return to the default, use the
no form of this command.
Syntax
ipv6 mld snooping
no ipv6 mld snooping
Parameters
N/A
Default Configuration
IPv6 MLD snooping is disabled.
Command Mode
Global Configuration mode
Example
The following example enables IPv6 MLD snooping.
switchxxxxxx(config)# ipv6 mld snooping
34.2 ipv6 mld snooping vlan
To enable MLD snooping on a specific VLAN, use the ipv6 mld snooping vlan
command in Global Configuration mode. To return to the default, use the no form of
this command.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48