Cisco 300 Series User Manual

IPv6 First Hop Security
527 OL-32830-01 Command Line Interface Reference Guide
25
switchxxxxxx(config-if)# ipv6 nd raguard attach-policy policy1 vlan 1-10,12-20
switchxxxxxx(config-if)# exit
Example 3—In the following example, the RA Guard policy policy1 is attached to
the gi11 port and applied to VLANs 1-10 and the RA Guard policy policy2 is
attached to the gi11 port and applied to VLANs 12-20:
switchxxxxxx(config)# interface gi11
switchxxxxxx(config-if)# ipv6 nd raguard attach-policy policy1 vlan 1-10
switchxxxxxx(config-if)# ipv6 nd raguard attach-policy policy2 vlan 12-20
switchxxxxxx(config-if)# exit
Example 4—In the following example RA Guard detaches policy policy1 from the
gi11 port:
switchxxxxxx(config)# interface gi11
switchxxxxxx(config-if)# no ipv6 nd raguard attach-policy policy1
switchxxxxxx(config-if)# exit
25.32 ipv6 nd raguard attach-policy (VLAN
mode)
To attach an RA Guard policy to a specified VLAN, use the ipv6 nd raguard
attach-policy command in VLAN Configuration mode. To return to the default, use
the no form of this command.
Syntax
ipv6 nd raguard attach-policy
policy-name
no ipv6 nd raguard attach-policy
Parameters
• policy-name —The RA Guard policy name (up to 32 characters).

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48