Cisco 300 Series

802.1X Commands
OL-32830-01 Command Line Interface Reference Guide 60
2
2.14 dot1x page customization
Use the dot1x page customization command in Global Configuration mode
command to enter the Web-Based Page Customization Configuration mode,
Syntax
dot1x page customization
Parameters
N/A
Default Configuration
No user customization.
Command Mode
Web-Based Page Customization Configuration mode
User Guidelines
The command should not be entered or edited manually (unless when using
copy-paste). It is a part of the configuration file produced by the switch.
A user must customize the web-based authentication pages by using the browser
Interface.
Example
The following example shows part of a web-based page customization
configuration:
switchxxxxxx(config)# dot1x page customization
switchxxxxxx(config-web-page)# data 1feabcde
switchxxxxxx(config-web-page)# data 17645874
switchxxxxxx(config-web-page)# exit