Cisco 300 Series User Manual

GARP VLAN Registration Protocol (GVRP) Commands
OL-32830-01 Command Line Interface Reference Guide 428
20
Default Configuration
Dynamic registration of VLANs on the port is allowed.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
Example
The following example forbids dynamic registration of VLANs on
gi1 2.
switchxxxxxx(config-if)# interface gi12
switchxxxxxx(config-if)# gvrp registration-forbid
20.5 gvrp vlan-creation-forbid
To disable dynamic VLAN creation or modification, use the gvrp
vlan-creation-forbid Interface Configuration mode command. To enable dynamic
VLAN creation or modification, use the no form of this command.
Syntax
gvrp vlan-creation-forbid
no gvrp vlan-creation-forbid
Parameters
This command has no arguments or keywords.
Default Configuration
Enabled.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
Example
The following example disables dynamic VLAN creation on
gi1 3.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48