Cisco 300 Series

System Management Commands
991 OL-32830-01 Command Line Interface Reference Guide
50
50.21 show system sensors
To view the temperature sensor status, use the show system sensors EXEC mode
command.
Syntax
show system sensors
Parameters
This command has no arguments or keywords.
Default Usage
None
Command Mode
User EXEC mode
Examples
Example 1: For Standalone systems with a single sensor status
switchxxxxxx> show system sensors
Sensor Status: OK
Temperature(C): 37
Example 2: For systems with multiple sensor statuses
Sensor Sensor Temperature(c)
Status
--- --------- --------------
1 OK 37
2 Failure
Example 3: For systems with a single sensor status
switchxxxxxx> show system sensors