Cisco 300 Series User Manual

Auto-Update and Auto-Configuration
OL-32830-01 Command Line Interface Reference Guide 196
6
6.6 ip dhcp tftp-server image file
Use the ip dhcp tftp-server image file Global Configuration mode command to set
the indirect file name of the image file to be downloaded from the backup server
when it has not been received from the DHCP server. Use the no form of this
command to remove the file name.
Syntax
ip dhcp tftp-server image file
file-path
no ip dhcp tftp-server image file
Parameters
• file-path —Full indirect file path and name of the configuration file on the
server.
Default Configuration
No file name
Command Mode
Global Configuration mode
User Guidelines
The backup server can be a TFTP server or a SCP server.
Examples
switchxxxxxx# ip dhcp tftp-server image file imag/imag-file
6.7 show ip dhcp tftp-server
Use the show ip dhcp tftp-server EXEC mode command to display information
about the backup server.
Syntax
show ip dhcp tftp-server

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48