Cisco 300 Series User Manual

Auto-Update and Auto-Configuration
OL-32830-01 Command Line Interface Reference Guide 194
6
-----------
Image Download via DHCP: enabled
Auto Update State: Downloaded indirect image file
Indirect Image filename: /image/indirectimage.txt
6.4 ip dhcp tftp-server ip address
Use the ip dhcp tftp-server ip address Global Configuration mode command to
set the backup server’s IP address. This address server as the default address
used by a switch when it has not been received from the DHCP server. Use the no
form of the command to return to default.
Syntax
ip dhcp tftp-server ip address
ip-addr
no ip dhcp tftp-server ip address
Parameters
• ip-addr —IPv4 Address, or IPv6 Address or DNS name of TFTP or SCP
server.
Default Configuration
No IP address
Command Mode
Global Configuration mode
User Guidelines
The backup server can be a TFTP server or a SCP server.
Examples
Example 1. The example specifies the IPv4 address of TFTP server:
switchxxxxxx# ip dhcp tftp-server ip address 10.5.234.232

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48