Cisco 300 Series User Manual

DHCP Snooping Commands
319 OL-32830-01 Command Line Interface Reference Guide
13
13.11 show ip dhcp snooping binding
Use the show ip dhcp snooping binding User EXEC mode command to display the
DHCP Snooping binding database and configuration information for all interfaces
or for a specific interface.
Syntax
show ip dhcp snooping binding
[mac-address mac-address ] [ip-address
ip-address ] [vlan vlan-id ] [ interface-id ]
Parameters
• mac-address mac-address —Specifies a MAC address.
• ip-address ip-address —Specifies an IP address.
• vlan vlan-id —Specifies a VLAN ID.
• interface-id —Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
User EXEC mode
Example
The following examples displays the DHCP snooping binding database and
configuration information for all interfaces on a device.-
switchxxxxxx# show ip dhcp snooping binding
Update frequency: 1200
Total number of binding: 2
Mac Address
------------
0060.704C.73FF
0060.704C.7BC1
IP Address
---------
10.1.8.1
10.1.8.2
Lease
(sec)
-------
7983
92332
Type
--------
snooping
snooping
(s)
VLAN
----
3
3
Interface
---------------
gi11
gi12

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48