Cisco 300 Series User Manual

IPv6 First Hop Security
587 OL-32830-01 Command Line Interface Reference Guide
25
Neighbor Binding Integrity is enabled on VLANs:1-4,6-7,100-120
Binding logging: disabled
Binding lifetime: 56 minutes
Address Configuration method: dhcp
Binding address prefix validation: disabled
Maximum entries
VLAN: unlimited
Port: 1
MAC: 1
25.77 show ipv6 neighbor binding policy
To display Neighbor Binding policies, use the show ipv6 neighbor binding policy
command in Privilege EXEC configuration mode.
Syntax
show ipv6 neighbor binding policy [
policy-name | active]
Parameters
• policy-name —Neighbor Binding policy name.
• active—Displays the attached Neighbor Binding policies.
Command Mode
Privileged EXEC mode
User Guidelines
This command either displays all policies or a specific one.
Examples
Example 1—The following example displays the policy configuration for a policy
named policy1:
switchxxxxxx# show ipv6 neighbor binding policy policy1

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48