Cisco 300 Series User Manual

Address Table Commands
163 OL-32830-01 Command Line Interface Reference Guide
5
Default Configuration
Forwarding.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode.
Example
The following example drops Unicast packets on gi11 when the destination is
unknown.
switchxxxxxx(config)# interface gi11
switchxxxxxx(config-if)# bridge unicast unknown filtering
5.18 show bridge unicast unknown
To display the unknown Unicast filtering configuration, use the show bridge unicast
unknown Privileged EXEC mode command.
Syntax
show bridge unicast unknown [interface-id]
Parameters
interface-id—(Optional) Specify an interface ID. The interface ID can be one of the
following types: Ethernet port or port-channel
Command Mode
Privileged EXEC mode
Example
Console # show bridge unicast unknown
Port Unregistered
------ -------------
gi11 Forward
gi12 Filter

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48