Cisco 300 Series

CDP Commands
213 OL-32830-01 Command Line Interface Reference Guide
8
Parameters
N/A
Command Mode
Privileged EXEC mode
Example
The example deletes all entries from the CDP Cache tables:
switchxxxxxx# clear cdp table
8.16 show cdp
The show cdp Privileged EXEC mode command displays the interval between
advertisements, the number of seconds the advertisements are valid and version
of the advertisements.
Syntax
show cdp
Parameters
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show cdp
Global CDP information:
cdp is globally enabled
cdp log duplex mismatch is globally enabled
cdp log voice VLAN mismatch is globally enabled
cdp log native VLAN mismatch is globally disabled
Mandatory TLVs are
Device-ID TLV (0x0001
Address TLV (0x0002)
Port-ID TLV (0x0003)
Capabilities TLV (0x0004)