Cisco 300 Series

Virtual Local Area Network (VLAN) Commands
OL-32830-01 Command Line Interface Reference Guide 1080
56
VLAN Name
---- ---------
73 Out
56.28 private-vlan
Use the private-vlan Interface VLAN Configuration mode command to configure a
private VLAN. Use the no form of this command to return the VLAN to normal VLAN
configuration.
Syntax
private-vlan
{primary | community | isolated}
no private-vlan
Parameters
• primary—Designate the VLAN as a primary VLAN.
• community—Designate the VLAN as a community VLAN.
• isolated—Designate the VLAN as an isolated VLAN.
Default Configuration
No private VLANs are configured.
Command Mode
Interface (VLAN) Configuration mode
User Guidelines
• The VLAN type cannot be changed if there is a private VLAN port that is a
member in the VLAN.
• The VLAN type cannot be changed if it is associated with other private
VLANs.
• The VLAN type is not kept as a property of the VLAN when the VLAN is
deleted.