Cisco 300 Series User Manual

IGMP Snooping Commands
449 OL-32830-01 Command Line Interface Reference Guide
21
21.19 show ip igmp snooping multicast-tv
To display the IP addresses associated with Multicast TV VLANs, use the show ip
igmp snooping multicast-tv EXEC mode command in User EXEC mode.
Syntax
show ip igmp snooping multicast-tv [vlan
vlan-id ]
Parameters
• vlan vlan-id —(Optional) Specifies the VLAN ID.
Command Mode
User EXEC mode
Example
The following example displays the IP addresses associated with all Multicast TV
VLANs.
switchxxxxxx# show ip igmp snooping multicast-tv
VLAN IP Address
---- -----------
1000 239.255.0.0
1000 239.255.0.1
1000 239.255.0.2
1000 239.255.0.3
1000 239.255.0.4
1000 239.255.0.5
1000 239.255.0.6
VLAN
----
1000
Dynamic
---------
gi11
Static
---------
gi12
Forbidden
----------
gi13-4

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48