Cisco 300 Series User Manual

IP Addressing Commands
459 OL-32830-01 Command Line Interface Reference Guide
22
Parameters
N/A
Default
Enabled by default.
Command Mode
Global Configuration mode
User Guidelines
This command overrides any proxy ARP interface configuration.
The command is supported only in the router mode.
Example
The following example globally disables ARP proxy.
switchxxxxxx(config)# ip arp proxy disable
22.9 ip proxy-arp
Use the ip proxy-arp Interface Configuration mode command to enable an ARP
proxy on specific interfaces. Use the no form of this command disable it.
Syntax
ip proxy-arp
no ip proxy-arp
Default Configuration
ARP Proxy is disabled.
Command Mode
Interface Configuration mode

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48