Cisco 300 Series User Manual

49
OL-32830-01 Command Line Interface Reference Guide 954
SYSLOG Commands
49.0
49.1 aaa logging
To enable logging AAA logins, use the aaa logging Global Configuration mode
command. To disable logging AAA logins, use the no form of this command.
Syntax
aaa logging
{ login}
no aaa logging {login}
Parameters
login—Enables logging messages related to successful AAA login events,
unsuccessful AAA login events and other AAA login-related events.
Default Configuration
Enabled.
Command Mode
Global Configuration mode
User Guidelines
This command enables logging messages related to successful login events,
unsuccessful login events and other login-related events. Other types of AAA
events are not subject to this command.
Example
The following example enables logging AAA login events.
switchxxxxxx(config)# aaa logging login

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48