Cisco 300 Series

Address Table Commands
175 OL-32830-01 Command Line Interface Reference Guide
5
Parameters
• vlan vlan —(Optional) Specifies VLAN.
• interface-id interface-id —(Optional) Specifies an interface ID. The interface
ID can be one of the following types: Ethernet port or port-channel.
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show mac address-table count
This may take some time.
Capacity : 16384
Free : 16379
Used : 5
Secure : 0
Dynamic : 2
Static : 2
Internal : 1
console#
5.28 show bridge multicast mode
To display the Multicast bridging mode for all VLANs or for a specific VLAN, use
the show bridge multicast mode Privileged EXEC mode command.
Syntax
show bridge multicast mode
[vlan vlan-id ]
Parameters
vlan
vlan-id —(Optional) Specifies the VLAN ID.
Command Mode
Privileged EXEC mode